Operation Manual

36
7
Copy settings 7
You can change the copy settings temporarily
for the next copy.
The machine returns to its default settings
after being idle for 1 minute, or if the Mode
Timer returns the machine to Fax mode.
(Mode Timer uu page 3)
To change a setting, press COPY, Options
and then press s or t to scroll through the
copy settings. When the setting you want is
displayed, press it and choose your option.
When you are finished choosing settings,
press Mono Start or Colour Start.
Note
• You can save some of the settings that
you use most often by setting them as
default. These settings will remain until
you change them again. (Setting your
changes as a new default uu page 44)
•The Ink Save Mode,
Thin Paper Copy and Book Copy
features are supported by technology
from Reallusion, Inc.
Stop copying 7
To stop copying, press Stop/Exit.
Changing copy speed and
quality 7
You can choose from a range of speed and
quality. The factory default is Normal.
 Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
 Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
 Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press Options.
e Press s or t to display Quality.
f Press Quality.
g Press s or t to display Fast, Normal
or Best, and then press the option you
want to use.
h If you do not want to change additional
settings, press Mono Start or
Colour Start.
Making copies 7