Operation Manual

Printing photos from a memory card or USB Flash memory drive
53
8
Setting your changes as a
new default 8
You can save the print settings you use most
often by setting them as the default settings,
such as Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Date Print. These settings will remain
until you change them again.
a Press (PHOTO).
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b Press Options.
c Press your new setting.
Repeat this step for each setting you
want to change.
d After changing the last setting, press
s or t to choose Set New Default.
e Press Set New Default.
f Press OK.
The LCD asks you again to confirm if
you set the change as the new default.
Press Yes.
g Press Stop/Exit.
Restoring all settings to the
factory default 8
You can restore the PhotoCapture settings
you have changed back to the factory default
for, Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Date Print.
a Press (PHOTO).
Do one of the following:
 Press View Photos and press
s or t to display each photo. When
the photo you want to print is
displayed, press OK.
 Press Print All.
b Press Options.
c Press s or t to display
Factory Reset.
d Press Factory Reset.
e Press Yes to confirm.
f Press Stop/Exit.