Operation Manual

Chapter 8
54
Scan to a memory card
or USB Flash memory
drive
8
How to set a new default 8
You can save the Scan to Media settings
(Quality and File Type) you use most
often by setting them as the default settings.
These settings will remain until you change
them again.
a Press (SCAN).
b Press s or t to display
Scan to Media.
c Press Scan to Media.
d Press Options.
e Press Quality or File Type. Then
press the option you want to change.
Repeat this step for each setting you
want to change.
f After you are finished choosing you
preferred settings, press s or t to
display Set New Default.
g Press Set New Default.
h Press OK.
The LCD asks you again to confirm if
you want to set the change as the new
default.
Press Yes.
i Press Stop/Exit.
How to reset to the factory
default 8
You can restore all the Scan to Media settings
(Quality and File Type), that you have
changed, back to the factory default.
a Press (SCAN).
b Press s or t to display
Scan to Media.
c Press Scan to Media.
d Press Options.
e Press s or t to display
Factory Reset.
f Press Factory Reset.
g Press Yes to confirm.
h Press Stop/Exit.