User Manual

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Setup Receive
Set the machine to forward fax messages, to store incoming
faxes in the memory (so you can retrieve them while you are
away from your machine), or the cloud service.
If you select Fax Forward, or Forward to Cloud, you can turn
on the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of received faxes.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification
Report.
Journal Period
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of the week.
Print Document
- - Print received faxes stored in the machine's memory.
Remote Access
- - Set your own code for Remote Retrieval.
Dial Restriction Dial Pad
- Set the machine to restrict dialling when using the dial pad.
Address Book
- Set the machine to restrict the dialling when using the
Address Book.
Shortcuts
- Set the machine to restrict the dialling when using a
Shortcut.
LDAP Server
(Available only for
some countries.)
- Set the machine to restrict dialling when using LDAP search.
Remaining Jobs
- - Check which scheduled jobs are in the machine's memory
and cancel selected jobs.
Miscellaneous Distinctive
(For some countries)
- Use with telephone company distinctive ringing service
allows you to have a voice number and fax number on the
one phone line.
FaxAbility
(For New Zealand
only)
- If you have FaxAbility from Telecom, use this function to
store the ringing pattern of your fax number.
And if you set in to On, you should use the registered
number only.
Call Waiting
(For New Zealand
only)
- If you have Call Waiting service, use this function to answer
second call when you are on the phone and someone rings
you.
[Settings] > [All Settings] > [Printer]
(MFC-J5930DW)
Level 1
Level 2 Level 3 Descriptions
Emulation
- - Select the emulation mode.
2-sided 2-sided Print
- Enable or disable 2-sided printing and choose long edge or short
edge.
HP Tray Command
- - Select the correct version of HP LaserJet emulation.
Reset Printer
- - Restore the printer settings to the factory settings.
751