User Manual

Home > Fax > Receive a Fax > Remote Fax Retrieval > Set a Remote Access Code
Set a Remote Access Code
Set a Remote Access Code to access and control your Brother machine even when you are away from it.
>> MFC-J5330DW
>> MFC-J5830DW/MFC-J5930DW
MFC-J5330DW
1. Press [Settings] > [All Settings] > [Fax] > [Remote Access].
2. Enter a three-digit code using the numbers [0] through [9], [*], or [#] using the dial pad (The preset '*'
cannot be changed).
Press [OK].
• DO NOT use the same code used for Fax Receive Code (*51) or Telephone Answer Code (#51).
• To delete your code, press and hold to restore the inactive setting (- - - *), and then press [OK].
3. Press .
MFC-J5830DW/MFC-J5930DW
1. Press [Settings] > [All Settings] > [Fax] > [Remote Access].
2. Enter a three-digit code using the numbers [0] through [9], [*], or [#] using the dial pad (The preset '*'
cannot be changed).
Press [OK].
• DO NOT use the same code used for Fax Receive Code (*51) or Telephone Answer Code (#51).
• To delete your code, press and hold to restore the inactive setting (---*), and then press [OK].
3. Press .
Related Information
• Remote Fax Retrieval
• Use Your Remote Access Code
• Operation from External and Extension Telephones
• Use the Remote Codes
331