User Manual

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Miscellaneous Distinctive
(USA and Canada
only)
Distinctive
Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern
on the machine.
Ring Pattern
Area Code
(USA only)
- Set your 3-digit area code only if you do not dial it
within your own area code.
[Settings] > [All Settings] > [Network]
Level 1 Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP BOOT Method
- Select the BOOT method that
best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server
- Specify the IP address of the
primary or secondary WINS
server.
DNS Server
- Specify the IP address of the
primary or secondary DNS
server.
APIPA
- Set the machine to allocate the
IP address from the link-local
address range automatically.
IPv6
- Turn the IPv6 protocol on or off.
To use the IPv6 protocol, go to
the Brother Solutions Center at
support.brother.com for more
information.
Ethernet
- - Select the Ethernet link mode.
Wired Status
- - View the current wired status.
MAC Address
- - View the machine's MAC
address.
WLAN TCP/IP BOOT Method
- Select the BOOT method that
best suits your needs.
IP Address
- Enter the IP address.
Subnet Mask
- Enter the Subnet mask.
Gateway
- Enter the Gateway address.
Node Name
- Enter the Node name.
WINS
Configuration
- Select the WINS configuration
mode.
WINS Server
- Specify the IP address of the
primary or secondary WINS
server.
DNS Server
- Specify the IP address of the
primary or secondary DNS
server.
746