User Manual

Table Of Contents
Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN TCP/IP APIPA
- Set the machine to allocate the
IP address from the link-local
address range automatically.
IPv6
- Turn the IPv6 protocol on or off
for a wireless LAN. To use the
IPv6 protocol, go to the Brother
Solutions Center at
support.brother.com for more
information.
Setup Wizard
- - Configure your internal print
server manually.
WLAN
Assistant
- - Configure your wireless network
settings using the Brother CD-
ROM.
WPS
- - Configure your wireless network
settings using the one-button
push method.
WPS w/ PIN
Code
- - Configure your wireless network
settings using WPS with a PIN.
WLAN Status Status
- View the current wireless
network status.
Signal
- View the current wireless
network signal strength.
SSID
- View the current SSID.
Comm. Mode
- View the current
Communication Mode.
MAC Address
- - View the machine's MAC
address.
Wi-Fi Direct Push Button
- - Configure your Wi-Fi Direct
network settings using the one-
button push method.
PIN Code
- - Configure your Wi-Fi Direct
network settings using WPS
with a PIN code.
Manual
- - Configure your Wi-Fi Direct
network settings manually.
Group Owner
- - Set your machine as the Group
Owner.
Device
Information
Device Name
- View your machine's device
name.
SSID
- View the Group Owner's SSID.
When the machine is not
connected, the LCD displays
Not Connected.
IP Address
- View your machine's current IP
Address.
Status
Information
Status
- View the current Wi-Fi Direct
network status.
Signal
- View the current Wi-Fi Direct
network signal strength.
When your machine acts as
Group Owner, the LCD always
indicates a strong signal.
747