Quick Setup Guide
Table Of Contents
- Quick Setup Guide MFC-J6510DW MFC-J6710DW
- Start Here
- 1 Unpack the machine and check the components
- 2 Load plain Letter/A4 paper
- 3 Connect the power cord and telephone line
- 4 Install the ink cartridges
- 5 Check the print quality
- 6 Set the paper settings
- 7 Wireless setup (if needed)
- 8 Choose your language (if needed)
- 9 Choose the correct Receive Mode
- 10 Set the date and time
- 11 Set your Station ID
- 12 Fax Transmission Report
- 13 Set Tone or Pulse dialing mode (Canada only)
- 14 Set the telephone line compatibility
- 15 Automatic Daylight Savings Time
- 16 Send in the Product Registration Sheet (USA only)
- 17 Manual Feed Slot
- 18 Choose your connection type
- For USB interface users (Windows® 2000 Professional/XP Home/XP Professional/Windows Vista®/Windows® 7)
- For USB interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wired network interface users (Windows® 2000 Professional/XP Home/XP Professional/Windows Vista®/Windows® 7)
- For wired network interface users (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- For wireless network interface users
- 19 Before you begin
- 20 Choose your wireless setup method
- 21 Manual setup from the control panel using the Setup Wizard (Macintosh, Mobile Devices and Windows®)
- 21 One-push Setup using WPS or AOSS™ (Windows® and Macintosh)
- Troubleshooting
- Install the drivers & software (Windows® 2000 Professional/XP Home/XP Professional/Windows Vista®/Windows® 7)
- Install the drivers & software (Mac OS X 10.4.11, 10.5.x, 10.6.x)
- Install Optional Applications Windows®
- For Network Users
- Consumables
- brother USA/CAN
- Start Here
19
Windows
®
Wired Network
Windows
®
Macintosh
Wired Network
For wired network interface users
(Windows
®
2000 Professional/XP Home/XP Professional/Windows Vista
®
/Windows
®
7)
19
Before you install
a Make sure that your computer is ON and you
are logged on with Administrator rights.
20
Connect the network
cable
a Lift the scanner cover into the open position.
b You will find the LAN socket marked with a
symbol inside the machine on the left as shown
below. Remove the protective cap and connect
the network cable to the LAN socket.
c Carefully guide the network cable into the cable
channel and out the back of the machine.
Connect the cable to your network.
IMPORTANT
If there are any programs running, close them.
Note
• For the latest drivers and information, visit
http://solutions.brother.com/
.
• The screens may differ depending on your
operating system.
• The installation CD-ROM includes ScanSoft™
PaperPort™12SE. This software supports
Windows
®
XP Home (SP3 or greater), XP
Professional (SP3 or greater), Windows Vista
®
(SP2 or greater) and Windows
®
7. Update to
the latest Windows
®
Service Pack before
installing MFL-Pro Suite.
For Windows
®
2000 (SP4 or greater), when the
ScanSoft™ PaperPort™11SE download
screen appears during the installation of
MFL-Pro Suite, follow the on-screen
instructions.
IMPORTANT
Make sure that the cable does not restrict the
cover from closing, or an error may occur.
Note
If both USB and LAN cables are being used,
guide both cables through the cable channel with
one on top of the other.
LAN USB