Operation Manual

Chapter 8
64
Date Print 8
You can print the date if it is already in your
photo’s data. The date will be printed on the
lower-right corner. If the data doesn’t have
the date information, you cannot use this
function.
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Photo.
d Press d or c to display View Photos.
e Press View Photos.
f Press d or c to display each photo.
When the photo you want is displayed,
press it, and then press OK.
g Press OK.
h Press Print Settings.
i Press a or b to display Date Print.
j Press Date Print.
k Press On (or Off).
l If you do not want to change additional
settings, press or OK.
Press Start to print.
NOTE
The DPOF setting on your camera must
be turned off to use the Date Print
feature.
Setting your changes as a
new default 8
You can save the print settings you use most
often—such as Print Quality,
Paper Type, Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Colour Enhance, Cropping,
Borderless and Date Print—by setting
them as the default settings. These settings
will remain until you change them again.
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Photo.
d Press d or c to display View Photos.
e Press View Photos.
f Press d or c to display each photo.
When the photo you want is displayed,
press it, and then press OK.
g Press OK.
h Press Print Settings.
i Press your new setting.
Repeat this step for each setting you
want to change.
j After changing the last setting, press a
or b to display Set New Default.
k Press Set New Default.
l The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
m Press .