Operation Manual
Printing photos from a memory card or USB Flash drive
67
8
How to set a new default 8
You can save the Scan to Media settings—
such as ADF High Speed Mode,
Scan Type, Resolution, File Type,
Scan Size, Scan Long Paper,
Auto Crop and
Remove Background Colour—by setting
them as the default settings. These settings
will remain until you change them again.
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Scan to Media.
d Press Options.
e Press a or b to display
ADF High Speed Mode, Scan Type,
Resolution, File Type,
Scan Size, Scan Long Paper,
Auto Crop or
Remove Background Colour, and
then press the setting you want to
change. Then press the option you want
to set.
Repeat this step for each setting you
want to change.
f After you are finished choosing your
preferred settings, press a or b to
display Set New Default.
g Press Set New Default.
h The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
i Press .
How to reset to the factory
default 8
You can restore all the Scan to Media settings
that you have changed—such as
ADF High Speed Mode, Scan Type,
Resolution, File Type, Scan Size,
Scan Long Paper, Auto Crop and
Remove Background Colour—back to
the factory default.
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Scan to Media.
d Press Options.
e Press a or b to display
Factory Reset.
f Press Factory Reset.
g The Touchscreen asks you to confirm to
change back to the factory default.
Press Yes to confirm.
h Press .