Wi-Fi Direct™ Guide

Configuration methods
8
2
NOTE
When the machine receives the Wi-Fi Direct™ request from your mobile device, the message
Wi-Fi Direct connection request received. will be displayed. Press OK to connect. If this
happens before you reach step i in the instructions that follow, go directly to step i and continue
configuration.
a Press .
b Press All Settings.
c Press Network.
d Press Wi-Fi Direct.
e Press Group Owner and then press On.
f Press PIN Code.
g When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
h When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate
your mobile device’s WPS PIN configuration method (see your mobile device’s user’s guide for
instructions) and then press OK on your Brother machine. This will start the Wi-Fi Direct™ setup.
To cancel, press .
i The machine will wait for a connection request from your mobile device. When PIN Code appears, type
the PIN displayed on your mobile device in to the machine.
Press OK.
j If your mobile device connects successfully, the machine displays the message Connected.
You have completed the Wi-Fi Direct™ network setup. For more information on printing from or scanning
to your mobile device, download the Mobile Print/Scan Guide for Brother iPrint&Scan or the AirPrint
Guide from the Brother Solutions Center (http://solutions.brother.com/).
If the connection fails, see Troubleshooting on page 15.
Manual configuration for a Wi-Fi Direct™ network 2
If your mobile device does not support an automatic Wi-Fi Direct™ connection or WPS, you must configure
a Wi-Fi Direct™ network manually.
a Press .
b Press All Settings.
c Press Network.
d Press Wi-Fi Direct.
e Press Manual.