User Manual

Chapter 3
16
Cancelling a Broadcast in progress 3
a Press .
b Do one of the following:
 To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
 To cancel the current job, press the
name or number being dialled on the
Touchscreen. Go to step d.
 To exit without cancelling, press .
c When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
 Press Yes to confirm.
 To exit without cancelling, press No.
d Do one of the following:
 To cancel the current job, press Yes.
 To exit without cancelling, press No.
Real Time Transmission 3
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting the machine to scan it into memory.
You can do this by turning on
Real Time TX.
a Load your document.
b Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
c Press Options.
d Swipe up or down, or press a or b to
display Real Time TX.
e Press Real Time TX.
f Press On (or Off).
g Press OK.
h Enter the fax number.
i Press Fax Start.
NOTE
• If you are sending a colour fax or if the
memory is full and you are sending a
monochrome fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off).
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.