User Manual

Chapter 8
68
Contrast 8
You can choose the contrast setting.
Increasing the contrast will make an image
look sharper and more vivid.
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Photo.
d Swipe left or right to display
View Photos.
e Press View Photos.
Press OK.
f Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it, and then
press OK.
g Press OK.
h Press Print Settings.
i Swipe up or down, or press a or b to
display Contrast.
j Press Contrast.
k Adjust the level of contrast by pressing it
on the Touchscreen.
l If you do not want to change additional
settings, press or OK.
Press Start to print.
Color Enhancement 8
You can turn on the color enhancement
feature to print more vivid images. Print time
will be slower, and depending on the image,
this feature may use more ink.
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Photo.
d Swipe left or right to display
View Photos.
e Press View Photos.
Press OK.
f Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it, and then
press OK.
g Press OK.
h Press Print Settings.
i Swipe up or down, or press a or b to
display Color Enhance.
j Press Color Enhance.
k Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press
Color Enhance, and then press
On.
Go to step l.
 If you do not want to customize,
press Color Enhance, and then
press Off.
Press .
Go to step o.
l Press White Balance, Sharpness or
Color Density.