Wi-Fi Direct™ Guide
Table Of Contents
- Wi-Fi Direct™ Guide
- Applicable models
- Definitions of notes
- Trademarks
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Configuration methods
- 3 Troubleshooting
- 4 Glossary
- brother ENG
Configuration methods
4
2
For MFC-J3520/J3720/J6520DW/J6720DW, see Configuration using the PIN Method of Wi-Fi Direct™
on page 12.
PIN Method configuration using WPS
For MFC-J6920DW/J6925DW, see Configuration using the PIN Method of WPS on page 7
For MFC-J3520/J3720/J6520DW/J6720DW, see Configuration using the PIN Method of WPS
on page 13.
Manual wireless configuration
For MFC-J6920DW/J6925DW, see Manual configuration for a Wi-Fi Direct™ network on page 8
For MFC-J3520/J3720/J6520DW/J6720DW, see Manual configuration for a Wi-Fi Direct™ network
on page 14.
NOTE
To use the Brother iPrint&Scan functionality in a Wi-Fi Direct™ network configured by One-push
configuration using Wi-Fi Direct™ or by PIN Method configuration using Wi-Fi Direct™, the device you use
to configure Wi-Fi Direct™ must be running Android™ 4.0 or greater.