User Manual

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Notice Settings Document Alert
- Displays the alert when a document is left on the
scanner glass.
Copy Tip
- Displays the document placement guidance when
you open the document cover.
Scan Result(Skip
Blank Page)
- Displays a scan result of skip blank page when
finished.
Keyboard Settings
- - Select the type of keyboard for the LCD.
Sleep Mode
- - Select how long the machine must be idle before it
goes into Sleep Mode.
Auto Power Off
- - Select how long the machine must wait before it
automatically turns itself off after entering Sleep
Mode.
When set to Off, the machine will not power off
automatically.
[Settings] > [All Settings] > [Shortcut Settings]
Level 1
Level 2 Descriptions
(Select shortcut button.)
Rename
Change the shortcut name.
Edit
Change the shortcut settings.
Delete
Delete the shortcut.
[Settings] > [All Settings] > [Fax]
Level 1
Level 2 Level 3 Descriptions
Setup Receive Ring Delay
- Set the number of rings before the machine answers
in Fax Only or Fax/Tel mode.
Receive Mode
- Select the Receive Mode that best suits your needs.
F/T Ring Time
- Set the length of the pseudo/double-ring time in
Fax/Tel mode.
Fax Preview
- View received faxes on the LCD.
Easy Receive
- Receive fax messages automatically when you
answer a call and hear fax tones.
Remote Codes
- Answer calls at an extension or external telephone
and use codes to turn the machine on or off. You can
personalize the codes.
Auto Reduction
- Reduce the size of incoming faxes.
PC Fax Receive
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
Memory Receive
- Set the machine to forward fax messages, to call
your pager or cell phone, to store incoming faxes in
the memory (so you can retrieve them while you are
away from your machine), or the cloud service.
If you select Fax Forward, or Forward to Cloud, you
can turn on the Backup Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of
received faxes.
Report Setting Transmission
- Select the initial setup for the Transmission
Verification Report.
746