User Manual

1
NOTE
• Saveallpackingmaterialsandtheboxincaseforanyreasonyou
mustshipyourmachine.
• For a network connection you must purchase a network
interface cable. Please use the supplied USB cable for a USB
connection.
USB cable
WerecommendusingaUSB2.0cable(TypeA/B)thatis5metres
long.
Ethernet (Network) cable
Useastraight-throughCategory5(orgreater)twisted-paircable
for10BASE-Tor100BASE-TXFastEthernetNetwork.
2
Load plain A4 paper
1
Unpack the machine and check the components
Pullthepapertraycompletelyoutof
themachineasshownbythearrow. Fanthepaperwell.
Connectthetelephonelinecord.
UsethesocketmarkedLINEandguide
thecordoutthebackofthemachine.
Liftthescannercover. Closethescannercover.
FollowtheTouchscreen
instructionstounpackandinstall
theinkcartridges.
Afterinstallingallofinkcartridges,
themachinewillprepareinktube
systemforprinting.
Whenthemachinehasfinishedtheinitialcleaning
process,followtheTouchscreeninstructionsto
configurethemachine’ssettings.
• Checkprintquality
• Congurethetraysettings
• Viewoperationtips
• SetBrotherLCDMessagedefaults
• Printtheinstallationsheet
Opentheinkcartridgecover,andthen
removetheorangeprotectivepart
fromthemachine.
Loadthepaperinthetraywith
theprintingsurfacedown.
Connectthepowercord.Themachinewill
poweronautomatically.
Adjustthepaperguides.
Donotexceedthis
mark(bbb).
NOTE
Ifyouaresharingonetelephonelinewithanexternal
telephone,connectitasshownbelow.
NOTE
Youcanadjustthecontrolpanelangletoread
theTouchscreenmoreeasily.
NOTE
FollowtheTouchscreeninstructionstostore
theorangeprotectivepartinsidethemachine.
Ifyoumusttransportthemachine,remove
theinkcartridgesandreplacethispart.
Pulloutthepapersupport
untilitlocksintoplace.
Slowlypushthepapertray
completelyintothemachine.
a. Extensiontelephone
b. Externaltelephone
QuickSetupGuide
MFC-J3930DW
ReadtheProduct Safety Guidefirst,thenreadthisQuick Setup Guide
forthecorrectinstallationprocedure.
3
Connect the power cord
5
Install the inbox ink cartridges
6
Machine settings
CHN-ENG
VersionD
Inbox Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Product Safety Guide
Brother
Installation Disc
Telephone Line Cord
Maintenance Sheet Power Cord USB Interface Cable
1. Press [Settings]>[All Settings]>
[Initial Setup]>[Local Language].
2. Pressyourlanguage.
3. Press .
7
Select your language
(if needed)
8
Connect the telephone line cord
Ifyouarenotusingyourmachineasafax,goto
9
.
ThelatestmanualsareavailableattheBrotherSolutionsCenter:
www.95105369.com
4
Set the date and time
FollowtheTouchscreeninstructionstosetthedate
andtime.
Quicklyshakejusttheblack
inkcartridgehorizontally
15timesasshown,before
insertingitintothemachine.
Secure Network Access
Yourmachine’sdefaultpasswordisonthelabelon
thebackofthemachine(precededby"Pwd").
Westronglyrecommendyouchangeittoprotectyour
machinefromunauthorisedaccess.
1
2