User Manual
Table Of Contents
- Product Safety Guide
- How to use this guide:
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your product
- General precautions
- Connecting the product safely
- Servicing the product
- Important Information for Australia
- Important Information for New Zealand
- Important Information for Some Countries
- Product Warranty & Liability
- Trademarks
- Open Source Licensing Remarks
- Copyright and License
- Other Information
- Brother Customer Service
- Unlawful use of copying equipment
- brother OCE/ASA/SAF/GLF
10
IMPORTANT
• Disruption of power can wipe out information in the product’s memory.
• DO NOT connect your product to an electrical socket on the same circuit as large appliances
or other equipment that requires a significant amount of electricity to operate. Operating this
product in conjunction with the other product(s) could create an overvoltage, tripping your
circuit breaker or blowing your fuse.
• We recommend that you only use our genuine ink cartridges.
Use of non-genuine ink may cause damage to the print head, and also result in variations in
colours and print quality.
Connecting the product safely 1
WARNING
There are high-voltage electrodes inside the product. Before you access the inside of the
product, including for routine maintenance such as cleaning, make sure you have unplugged the
power cord from the electrical socket as well as any telephone (RJ-11) or Ethernet cables from
the product.
(This illustration is an example for Australia.)
DO NOT handle the plug with wet hands.
(This illustration is an example for Australia.)
Always make sure the plug is fully inserted.