User Manual

Secure Network Access
Your machine’s default password is on the label on
the back of the machine (preceded by "Pwd").
We strongly recommend you change it to protect your
machine from unauthorised access.
NOTE
• Most of the illustrations in this Quick Setup Guide show the
MFC-J6930DW.
• Save all packing materials and the box in case for any reason you
must ship your machine.
• You must purchase the correct interface cable for the
interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more
than 5 metres long.
Ethernet (Network) cable
Use a straight-through Category5 (or greater) twisted-pair cable
for 10BASE-T or 100BASE-TX Fast Ethernet Network.
2
Load plain A4 paper
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Pull the paper tray completely out of
the machine as shown by the arrow. Fan the paper well.
Connect the telephone line cord.
Use the socket marked LINE and guide
the cord out the back of the machine.
Lift the scanner cover. Close the scanner cover.
When the machine has finished the initial cleaning
process, follow the Touchscreen instructions to
configure the machine’s settings.
• Check print quality
• Congurethetraysettings
• View operation tips
• Set Brother LCD Message defaults
• Print the installation sheet
Open the ink cartridge cover, and then
remove the orange protective part
from the machine.
After turning the machine on, you may need to set your
country or language (depending on your machine).
If required, follow the Touchscreen instructions.
Load the paper in the tray.
Connect the power cord. The machine will
power on automatically.
Adjust the paper guides.
Do not exceed this
mark (bbb).
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below.
NOTE
You can adjust the control panel angle to read
the Touchscreen more easily.
NOTE
Follow the Touchscreen instructions to store
the orange protective part inside the machine.
If you must transport the machine, remove
the ink cartridges and replace this part.
Pull out the paper support
until it locks into place.
Slowly push the paper tray
completely into the machine.
a. Extension telephone
b. External telephone
Quick Setup Guide
MFC-J3930DW / MFC-J6930DW / MFC-J6935DW
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
3
Connect the power cord
6
Install the inbox ink cartridges
4
Select your country
or language
(Initial setup only)
7
Machine settings
D01DGG001-01
UK
Version D
(for UK) (for others)
Inbox Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Product Safety Guide
Brother
Installation Disc
Telephone Line Cord
Maintenance Sheet Power Cord
1. Press [Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2. Press your language.
3. Press .
8
Select your language
(if needed and only for
certain models)
9
Connect the telephone line cord
If you are not using your machine as a fax, go to
10
.
The latest manuals are available at the Brother Solutions Center:
solutions.brother.com/manuals
Watch our FAQ videos for help
with setting up your Brother
machine.
solutions.brother.com/videos
5
Set the date and time
Follow the Touchscreen instructions to set the date
and time.
Quickly shake just the black
ink cartridge horizontally
15 times as shown, before
inserting it into the machine.
Follow the Touchscreen
instructions to unpack and
install the ink cartridges.
The machine will prepare the
ink tube system for printing.
(Example for UK)
(Example for UK)
1
2