Basic User's Guide
Table Of Contents
- Basic User's Guide MFC-J6930DW
- Brother Numbers
- Ordering Accessories and Supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- You Can Use the Following Features
- User's Guides and Where to Find Them
- Basic Operations and Where to Find Instructions
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- For the Latest Driver Updates
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Routine Maintenance
- B Troubleshooting
- C Appendix
- D Index
3
Pull the jammed document out to the
right.
4
Close the document cover.
5
Press
.
Remove Paper Scraps Jammed in
the ADF
1
Lift the document cover.
2
Insert a piece of stiff paper, such as
cardstock, into the ADF to push any
small paper scraps through.
3
Close the document cover.
4
Press .
Printer Jam or Paper Jam
Locate and remove the jammed paper.
• Error and Maintenance Messages on
page 40
Related Information
Paper is Jammed in the Front of the
Machine
If the LCD displays the following paper jam
messages, follow these steps:
• [Jam Front/Rear], [Repeat Jam
Front/Rear]
• [Jam Front], [Repeat Jam Front]
• [Jam Front/MP Tray], [Repeat Jam
Front/MP Tray]
1
Unplug the machine from the AC power
outlet.
2
If the paper is loaded in the MP tray,
remove the paper.
3
Pull Tray #1 (1) completely out of the
machine as shown by the arrow.
1
56