Basic User's Guide
Table Of Contents
- Basic User's Guide MFC-J6930DW
- Brother Numbers
- Ordering Accessories and Supplies
- Notice - Disclaimer of Warranties (USA and Canada)
- You Can Use the Following Features
- User's Guides and Where to Find Them
- Basic Operations and Where to Find Instructions
- The Online User's Guide Helps You Get the Most Out of Your Machine
- Questions or Problems? Take a Look at our FAQs, Solutions, and Videos Online.
- Definitions of Notes
- For the Latest Driver Updates
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Routine Maintenance
- B Troubleshooting
- C Appendix
- D Index
• [Jam Tray2], [Repeat Jam Tray2]
1
Unplug the machine from the AC power
outlet.
2
If the paper is loaded in the MP tray,
remove the paper.
3
Pull Tray #1 (1) completely out of the
machine as shown by the arrow.
1
If your LCD error message was [Jam
Tray2] or [Repeat Jam Tray2], also
pull Tray #2 (2) completely out of the
machine as shown by the arrow.
2
When finished, continue with the next
step.
4
If your LCD error message was [Jam
Rear], [Repeat Jam Rear], [Jam
Tray2] or [Repeat Jam Tray2], do
the following:
a. Open the Jam Clear Cover (1) at the
back of the machine.
1
b. Slowly pull the jammed paper out of
the machine.
c. Close the Jam Clear Cover. Make
sure the cover is closed completely.
5
If your LCD error message was [Jam
MP Tray] or [Repeat Jam MP
Tray], push the release lever (1)
toward the back of the machine, and
B
Troubleshooting
61