Quick Setup Guide

NOTE
Manuals in Spanish for this model are available at support.brother.com.
Manuales en Español para este modelo están disponibles en support.brother.com.
• Save all packing materials and the box in case for any reason you must ship your
machine.
• You must purchase the correct interface cable for the interface you want to
use. A USB cable is included with some models.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than 16 feet
(5 meters) long.
Ethernet (Network) cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network.
2
Load plain Letter/A4 paper
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Pull the paper tray completely out of
the machine as shown by the arrow. Fan the paper well.
Connect the telephone line cord.
Use the jack marked LINE and guide
the cord out the back of the machine.
Lift the scanner cover. Close the scanner cover.
Follow the Touchscreen
instructions to unpack and
install the ink cartridges. The
machine will prepare the ink
tube system for printing.
When the machine has finished the initial cleaning
process, follow the Touchscreen instructions to
configure the machine settings.
• Check print quality
• Congurethetrayorpapersizesettings
• View operation tips
• Set Brother LCD Message defaults
• Print the installation sheet
Open the ink cartridge cover and remove
the orange protective part from the machine.
Load the paper in the tray.
Connect the power cord. The machine
will power on automatically.
Adjust the paper guides.
Do not exceed this
mark (bbb).
NOTE
If you are sharing one telephone line with an external
telephone, connect it as shown below. Before you
connect the external telephone, remove the white
protective cap c from the EX T. jack of the machine.
NOTE
You can adjust the control panel angle
to read the Touchscreen more easily.
NOTE
Follow the Touchscreen instructions to store
the orange protective part inside the machine.
If you must transport the machine, remove
the ink cartridges and replace this part.
Pull out the paper support
until it locks into place.
Slowly push the paper tray
completely into the machine.
a. Extension telephone
b. External telephone
c. Protective cap
Quick Setup Guide
MFC-J6930DW
Read the Product Safety Guide first, then read this Quick Setup Guide
for the correct installation procedure.
3
Connect the
power cord
5
Install the starter ink cartridges
4
Set the date
and time
6
Machine settings
D01DGE001-01
USA/CAN
Version D
Ink Cartridges
• Black
• Yellow
• Cyan
• Magenta
Quick Setup Guide
Product Safety Guide
Brother Installation Disc
Maintenance Sheet Telephone Line Cord
The correct Receive Mode is determined by the external devices
and telephone subscriber services (Voice Mail, Distinctive Ring,
etc.) you will be using on the same line as the Brother machine.
1. Press [Settings] > [All Settings] >
[Initial Setup] > [Local Language].
2. Press your language.
3. Press .
1. Press [Settings] > [All Settings] >
[Fax] > [Setup Receive] > [Receive Mode].
2. Press your preferred Receive Mode.
3. Press .
Store your name and fax number so the machine prints it on all
outgoing fax pages.
1. Press [Settings] > [All Settings] >
[Initial Setup] > [Station ID] > [Fax].
2. Enter your fax number (up to 20 digits) on the Touchscreen,
and then press [OK].
3. Press [Name].
4. Enter your name (up to 20 characters) using the Touchscreen,
and then press [OK].
5. Press .
8
Choose your language
(if needed)
10
Set your Station ID
If you are not using your machine as a fax, go to
11
7
Connect the telephone line cord
If you are not using your machine as a fax, go to
8
9
Choose the correct
Receive Mode
If you are not using your machine as a fax, go to
11
The latest manuals are available at the Brother Solutions Center:
solutions.brother.com/manuals
Follow the Touchscreen instructions
to set the date and time.
Quickly shake just the black
inkcartridgehorizontally
15 times as shown, before
inserting it into the machine.
1
2
3
Watch our FAQ Videos for help
with setting up your Brother
machine.
solutions.brother.com/videos