User Manual

ManualsBrandsBrother ManualsInkjet FaxesMFC-J6930DW

Table Of Contents

Using the

documentation

Please read this booklet before attempting to

operate the product, or before attempting any

maintenance. Failure to follow these

instructions may result in an increased risk of

personal injury or damage to property,

including through fire, electrical shock, burns

or suffocation.

Read all of the instructions. Save them for later

reference.

Symbols and conventions

used in the documentation 1

The following symbols and conventions are

used throughout the documentation.

Follow all warnings and instructions marked

on the product.

NOTE

The illustrations in this guide show the

MFC-J6930DW.

Product Safety Guide 1

MFC-J5330DW/J5830DW/J5930DW/

J6530DW/J6535DW/J6730DW/J6930DW/J6935DW

WARNING

WARNING indicates a potentially

hazardous situation which, if not avoided,

could result in death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injuries.

IMPORTANT

IMPORTANT indicates a potentially

hazardous situation which, if not avoided,

may result in damage to property or loss of

product functionality.

NOTE

NOTE specifies the operating environment,

conditions for installation, or special

conditions of use.

Prohibition icons indicate actions

that must not be performed.

This icon indicates that flammable

sprays must not be used.

This icon indicates that organic

solvents such as alcohol and liquids

must not be used.

Electrical Hazard icons alert you to

possible electrical shocks.

Fire Hazard icons alert you to the

possibility of a fire.

Bold Bold typeface identifies specific

keys on the product’s control

panel or on the computer

screen.

Italics Italicized typeface emphasizes

an important point or refers you

to a related topic.

Courier

New

Text in Courier New font

identifies messages on the

LCD of the product.

Summary of content (21 pages)

PAGE 1
Product Safety Guide 1 MFC-J5330DW/J5830DW/J5930DW/ J6530DW/J6535DW/J6730DW/J6930DW/J6935DW Using the documentation NOTE 1 Please read this booklet before attempting to operate the product, or before attempting any maintenance. Failure to follow these instructions may result in an increased risk of personal injury or damage to property, including through fire, electrical shock, burns or suffocation. NOTE specifies the operating environment, conditions for installation, or special conditions of use.
PAGE 2
Compilation and Publication 1 Under the supervision of Brother Industries, Ltd., this product’s manuals have been compiled and published, covering the latest product descriptions and specifications. The contents of the manuals and the specifications of this product are subject to change without notice.
PAGE 3
DO NOT place the product near chemicals or in a place where chemicals could be spilled on it. Should chemicals come into contact with the product, there may be a risk of fire or electrical shock. In particular, organic solvents or liquids such as benzene, paint thinner, polish remover, or deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or electrical shock. These or other chemicals may also cause the product to malfunction or become discolored.
PAGE 4
DO NOT place any objects around the product. Such objects block the access to the power outlet in case of emergency. It is important that the product can be unplugged whenever needed. IMPORTANT • DO NOT place your product next to devices that contain magnets or generate magnetic fields. Doing so may interfere with the operation of the product, causing print quality problems. • DO NOT place your product next to sources of interference, such as speakers or the base units of non-Brother cordless telephones.
PAGE 5
DO NOT handle the plug with wet hands. Always make sure the plug is fully inserted. Unplug the power plug regularly to clean it. Use a dry cloth to clean the root of the plug blades and between the blades. If the power plug is plugged into the outlet over a long period, dust accumulates around the plug blades, which may cause a short circuit, resulting in a fire. DO NOT take apart or attempt to convert the product. This may create a risk of fire or electrical shock.
PAGE 6
This product should be connected to an AC power source within the range indicated on the rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power source you have, contact a qualified electrician. Power Cord Safety: • (Canada only) This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded power outlet. This is a safety feature.
PAGE 7
DO NOT use the product near any medical electrical equipment. The radio wave emitted from the product may affect medical electrical equipment and cause a malfunction, which may result in accident or injury. For users with pacemakers This product generates a weak magnetic field. If you feel anything wrong with the operation of your pacemakers when near the product, move away from the product and consult a doctor immediately.
PAGE 8
To prevent injuries, be careful not to put your fingers in the areas shown in the illustrations. When changing the tray size from the Ledger, A3, Legal or Folio size to the original size, be careful not to pinch your fingers in the gaps or slots in the bottom of the tray. It may cause injury to you.
PAGE 9
(MFC-J6530DW/J6535DW/J6730DW/J6930DW/J6935DW) Be careful not to put your fingers in the areas shown in the illustrations. It may cause injury to you. (MFC-J5930DW/J6530DW/J6535DW/J6730DW/J6930DW/J6935DW) To prevent possible injuries, at least two people should lift the product. One person should hold the front of the product, and one person should hold the back, as shown in the illustration below. Carry the product by sliding your hands into the handhold indentations located on each side of the product.
PAGE 10
DO NOT carry the product by holding the areas shown in the illustrations. Doing this may cause the product to slip out of your hands and may result in injury. (MFC-J5330DW/J5830DW) Carry the product by sliding your hands into the handhold indentations located on each side of the product.
PAGE 11
When carrying the product, remove the trays if they have been expanded to hold large paper such as Ledger, A3, Legal or Folio size paper. The weight of the paper could cause the trays to fall and cause injury to you. If the ink contacts your skin or gets into your eye or mouth, please follow these steps immediately: • If your skin comes into contact with the ink, wash your skin with water and soap immediately. • If the ink gets into your eye, rinse it with water immediately.
PAGE 12
(MFC-J6530DW/J6535DW/J6730DW/J6930DW/J6935DW) DO NOT remove or damage any of the caution or warning labels inside the product. IMPORTANT • Disruption of power can wipe out information in the product’s memory. • If the product does not operate normally when the operating instructions are followed, adjust only those controls that are covered by the operating instructions.
PAGE 13
Regulation 1 WARNING When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and injury to people, including the following: • DO NOT allow this product to come into contact with water. This product should not be used around standing water, including a bath tub, sink, or swimming pool; around appliances containing water, including a refrigerator; or in a wet basement. • Avoid using this product during an thunderstorm.
PAGE 14
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.
PAGE 15
Federal Communications Commission (FCC) Declaration of Conformity (USA only) Responsible Party: 1 Brother International Corporation 200 Crossing Boulevard Bridgewater, NJ 08807-0911 USA TEL: (908) 704-1700 declares, that the products Product Name: MFC-J5330DW/J5830DW/J5930DW/J6530DW/J6535DW/J6730DW/J6930DW/J6935DW comply with Part 15 of the FCC Rules.
PAGE 16
RF Exposure Notice (USA or Canada only) (Wireless models only) 1 This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from person’s body.
PAGE 17
EQUIPMENT ATTACHMENT LIMITATIONS (Canada only) 1 NOTICE This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d’Innovation, Sciences et Développement économique Canada. NOTICE The Ringer Equivalence Number (REN) indicates the maximum number of devices allowed to be connected to a telephone interface.
PAGE 18
Trademarks 1 Windows, Windows Vista and Windows Phone are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Apple, Macintosh and Mac are trademarks of Apple Inc., registered in the United States and other countries. App Store is a service mark of Apple Inc. Wi-Fi® is a registered trademark of Wi-Fi Alliance®. Wi-Fi Protected Setup™ is a trademark of Wi-Fi Alliance®. Android and Google Play are trademarks of Google, Inc.
PAGE 19
Other Information 1 FlashFX® is a registered trademark of Datalight, Inc. FlashFX® Copyright 1998-2014 Datalight, Inc. U.S.Patent Office 5,860,082/6,260,156 FlashFX® Pro™ is a trademark of Datalight, Inc. FlashFX® Tera™ is a trademark of Datalight, Inc. Reliance™ is a trademark of Datalight, Inc. Reliance Nitro™ is a trademark of Datalight, Inc. Datalight® is a registered trademark of Datalight, Inc. Copyright 1989-2014 Datalight, Inc.
PAGE 20
To request a printed version of the Online User's Guide, please contact us at: Chile and Bolivia: Tel: 800-541-000 / Email: info@brother.cl Peru: Tel: 0800-00-066 / Email: info@brother.com.pe Mexico: Tel: 01-800-759-6000 / 01-800-759-8000 URL: www.brother.com.mx Argentina, Paraguay and Uruguay: In Argentina: www.brother.com.ar In Paraguay: www.brother.com.py In Uruguay: www.brother.com.uy Other countries in Latin America and the Caribbean: Tel: 888-800-7303* (Eastern Standard Time, USA.
PAGE 21
These machines are approved for use in the country of purchase only. Local Brother companies or their dealers will support only machines purchased in their own countries. www.brotherearth.