User Manual

Table Of Contents
Home > Copy > Copy an ID Card
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original
card size.
Make sure the paper size is set to A4 or Letter.
You may copy an identification card to the extent permitted under applicable laws. For more detailed
information, see the Product Safety Guide.
>> MFC-J3530DW
>> MFC-J3930DW
MFC-J3530DW
1. Place your identification card face down near the upper-left corner of the scanner glass.
a
b
c
d
a
a. 3 mm or greater (top, left)
b. 207 mm
c. 145 mm
d. scannable area
2. Press d or c to display
[2 in 1 ID Copy], and then press it.
3. Enter the number of copies in one of the following ways:
Press [-] or [+] on the touchscreen.
Press
to display the keyboard on the touchscreen, and then enter the number of copies using the
touchscreen keyboard. Press [OK].
Enter the number of copies using the dial pad.
4. To change the copy settings, press [Options]. When finished, press [OK].
5. Press [Mono Start] or [Colour Start].
The machine starts scanning one side of the identification card.
6. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan
the other side.
258