User Manual

Table Of Contents
Error Message Cause Action
You can try additional paper jam clear
operations.
See Related Information: Remove Paper
Scraps.
(If you cannot print received faxes,
transfer them to another fax machine or to
your computer.)
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Unable to Scan XX
The machine has a mechanical problem. Disconnect the machine from the power
for several minutes, and then reconnect it.
(If you cannot print received faxes,
transfer them to another fax machine or to
your computer.)
See Related Information: Transfer Your
Faxes or Fax Journal Report.
Unusable Device
Disconnect device
from front connector
& turn machine off &
then on
A broken device is connected to the USB
direct interface.
Unplug the device from the USB direct
interface, then press to turn the
machine off and then on again.
Unusable Device
Please disconnect USB
device.
A USB device or USB flash drive that is
not supported has been connected to the
USB direct interface.
Unplug the device from the USB direct
interface. Turn the machine off and then
on again.
Wrong Tray Settings
The machine's Paper Size and Tray Use
settings do not match the size of paper in
the tray you are using.
Follow the instructions on the touchscreen
and try to print again.
Configure the paper size setting for the
tray according to the LCD instructions.
Related Information
Troubleshooting
Transfer Your Faxes or Fax Journal Report
Error Messages When Using the Brother Web Connect Feature
Touchscreen LCD Overview
Print the Network Configuration Report
Replace the Ink Cartridges
Change the Check Paper Size Setting
Telephone Line Interference/VoIP
Load Documents in the Automatic Document Feeder (ADF)
Document Jams
Caller ID
Load Paper
Load Paper in the Manual Feed Slot
Printer Jam or Paper Jam
Paper is Jammed in the Front of the Machine
Remove Paper Scraps
Clean the Paper Pick-up Rollers
Turn Off Memory Receive
Print a Fax Stored in the Machine's Memory
570