Online User's Guide

Home > Machine Settings > Change Machine Settings from the Control Panel > General Settings > Set the
Date & Time
Set the Date & Time
The LCD displays the date and time. If they are not current, re-enter them. You can add the date and time to
each fax you send by setting your Station ID.
1. Press Settings.
2. Press a or b to select the following:
a. Select [Initial Setup]. Press OK.
b. Select [Date & Time]. Press OK.
c. Select [Date & Time]. Press OK.
3. Enter the last two digits of the year using the dial pad, and then press OK.
4. Enter the two digits for the month using the dial pad, and then press OK.
5. Enter the two digits for the day using the dial pad, and then press OK.
6. Select [12h Clock] or [24h Clock], and then press OK.
7. To enter the time, do one of the following:
• If you selected [12h Clock], enter the time (in 12-hour format) using the dial pad, and then press OK.
Select [AM] or [PM], and then press OK.
• If you selected [24h Clock], enter the time (in 24-hour format) using the dial pad, and then press OK.
8. Press Stop/Exit.
Related Information
• General Settings
• Set Your Station ID
• Register Your Machine with Google Cloud Print Using Web Based Management
455