User Manual
Table Of Contents
- Product Safety Guide
- Symbols and conventions used in the documentation
- Compilation and Publication Notice
- Choose a safe location for your machine
- General precautions
- Connecting the machine safely
- Servicing the machine
- Important Information for Australia
- Important Information for New Zealand
- Important Information for Some Countries
- Product Warranty & Liability
- Trademarks
- Open Source Licensing Remarks
- Other Information (MFC-J825DW/J5910DW only)
- Unlawful use of copying equipment
- brother ARL/ASA/NZ
8
(Not available for Taiwan)
This machine is equipped with a 3-wire grounded plug.
This plug will only fit into a grounded
power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call your
electrician to replace your obsolete outlet. DO NOT use the supplied grounded plug in any other
outlet except those specified, doing this may cause an electrical shock.
(This illustration is an example for Australia.)
DO NOT use the machine if the power cord is frayed or damaged, doing so may cause an
electrical shock or a fire.
DO NOT pull on the middle of the AC power cord. DO NOT allow anything to rest on the power
cord. DO NOT place this machine where people can walk on the cord. Doing this might cause
an electrical shock.
(MFC models only)
Never touch telephone wires or terminals that are not insulated unless the telephone line has
been unplugged at the wall socket. Never install telephone wiring during a lightning storm. Never
install a telephone wall socket in a wet location. Doing this might cause an electrical shock.