Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable
- Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Configuration using the machine’s control panel Setup Wizard
- Configuration in Ad-hoc Mode
- 4 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration Report
- Printing the WLAN Report
- Function table and default factory settings
- 5 Web Based Management (MFC-J5910DW only)
- 6 Internet fax (MFC-J5910DW only)
- 7 Security features (MFC-J5910DW only)
- 8 Troubleshooting
- Appendix A
- Index
Control panel setup
40
4
Relay Domain 4
You can register the Domain Names (Max. 5) that are allowed to request a Relay Broadcast.
Relay Report
4
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
Note
For more information on Relay Broadcast, see Relay broadcasting uu page 66.
Time Zone (MFC-J5910DW only) 4
This field displays your country time zone. The time shown is the time difference between your country and
Greenwich Mean Time. For example, the Time Zone for Eastern Time in the USA and Canada is UTC-05:00.
Windows
®
Time Zone setting 4
You can see the time difference for your country by using the Time Zone setting in Windows
®
.
a For Windows Vista
®
or Windows
®
7:
Click the button, Control Panel, Clock, Language, and Region, Date and Time, and then
Change time zone.
For Windows
®
XP:
Click the start button, Control Panel, Date, Time, Language, and Regional Options,
Date and Time, and then select Time Zone.
b Change the date and time. Verify your time zone settings from the drop-down list box (this displays the
time difference from GMT).
Network I/F (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW) 4
You can choose the network connection type, wired network connection or wireless network connection. If
you want to use the wired network connection, choose Wired LAN, and if you want to use the wireless
network connection, choose WLAN. You can only have one network connection type active at a time.