Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable
- Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Configuration using the machine’s control panel Setup Wizard
- Configuration in Ad-hoc Mode
- 4 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration Report
- Printing the WLAN Report
- Function table and default factory settings
- 5 Web Based Management (MFC-J5910DW only)
- 6 Internet fax (MFC-J5910DW only)
- 7 Security features (MFC-J5910DW only)
- 8 Troubleshooting
- Appendix A
- Index
Control panel setup
42
4
Printing the Network Configuration Report 4
Note
Node Name: The Node Name appears in the Network Configuration Report. The default Node Name is
“BRNxxxxxxxxxxxx” for a wired network or “BRWxxxxxxxxxxxx” for a wireless network (“xxxxxxxxxxxx” is
your machine’s MAC Address / Ethernet Address).
The Network Configuration Report prints a report listing the current network configuration including the
network print server settings.
For MFC-J425W/J430W/J432W/J435W 4
a Press Menu.
b Press a or b to choose Print Reports.
Press OK.
c Press a or b to choose Network Config.
Press OK.
d (For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
For MFC-J280W/J625DW/J825DW/J835DW/J5910DW and DCP-J525W/J725DW/J925DW 4
a Press Menu.
b Press a or b to display Print Reports and then press Print Reports.
c Press a or b to display Network Config and then press Network Config.
d For MFC-J825DW/J835DW and DCP-J925DW
(For US) Press Black Start or Color Start.
(For UK) Press Mono Start or Colour Start.
For MFC-J280W/J625DW/J5910DW and DCP-J525W/J725DW, press Start.