Network User's Guide
Table Of Contents
- NETWORK USER’S GUIDE
- Applicable models
- Definitions of notes
- Compilation and publication notice
- IMPORTANT NOTE
- Table of Contents
- 1 Introduction
- 2 Changing your machine’s network settings
- 3 Configuring your machine for a wireless network
- Overview
- Confirm your network environment
- Wireless configuration temporarily using a USB cable
- Wireless configuration temporarily using an Ethernet cable (For MFC-J825DW/J835DW/J5910DW and DCP-J925DW)
- One push configuration using Wi-Fi Protected Setup or AOSS™
- Configuration using the machine’s control panel Setup Wizard
- Configuration in Ad-hoc Mode
- 4 Control panel setup
- Network menu
- Restoring the network settings to factory default
- Printing the Network Configuration Report
- Printing the WLAN Report
- Function table and default factory settings
- 5 Web Based Management (MFC-J5910DW only)
- 6 Internet fax (MFC-J5910DW only)
- 7 Security features (MFC-J5910DW only)
- 8 Troubleshooting
- Appendix A
- Index
80
A
A
Supported protocols and security features A
1
Available for MFC-J5910DW only.
Appendix A A
Interface Ethernet 10/100BASE-TX
Wireless IEEE 802.11b/g/n (Infrastructure Mode / Ad-hoc Mode)
Network
(common)
Protocol (IPv4) ARP, RARP, BOOTP, DHCP, APIPA (Auto IP), WINS/NetBIOS name
resolution, DNS Resolver, mDNS, LLMNR responder, LPR/LPD,
Custom Raw Port/Port9100, FTP Client
1
and Server, TFTP server,
SMTP Client
1
, APOP
1
, POP before SMTP
1
, SMTP-AUTH
1
,
SNMPv1/v2c, ICMP, Web Services (Print/Scan), CIFS Client
1
Protocol (IPv6)
(MFC-J5910DW
only)
NDP, RA, mDNS, LPR/LPD, Custom Raw Port/Port9100, FTP Client
and Server, TFTP, POP3, SMTP Client, APOP, POP before SMTP,
SMTP-AUTH, SNMPv1, Scanner Port, Web Services (Print/Scan)
Network
(Security)
Wireless SSID (32 chr), WEP 64/128 bit, WPA-PSK (TKIP/AES), WPA2-PSK
(AES)