Operation Manual

Receiving a fax (MFC models)
29
4
Setup to receive delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a (MFC-J650DW)
Press (Fax).
(MFC-J870DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
b Press Options.
c Press a or b to display Polling RX.
d Press Polling RX.
e Press Timer.
f Enter the time (in 24-hour format) you
want to start polling.
For example, enter 21:45 for 9:45 PM.
Press OK.
g Enter the fax number you are polling by
either using Address Book or the dial
pad on the Touchpanel.
h Press Fax Start.
The machine makes the polling call at
the time you entered.
Sequential polling
(Monochrome only)
4
Sequential polling lets you request
documents from several fax machines in one
operation.
a (MFC-J650DW)
Press (Fax).
(MFC-J870DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and then
(Sending Faxes).
b Press Options.
c Press a or b to display Polling RX.
d Press Polling RX.
e Press Standard, Secure or Timer.
f Do one of the following:
 If you chose Standard, go to
step g.
 If you chose Secure, enter a four-
digit number, press OK, go to step g.
 If you chose Timer, enter the time
(24-hour format) you want to begin
polling and press OK, go to step g.
g Press Options.
h Press a or b to display Broadcasting.
i Press Broadcasting.
j Press Add Number.