Advanced User's Guide

Sending a fax
11
3
NOTE
You can choose four different resolution
settings for black & white faxes and two for
color faxes.
If you choose S.Fine or Photo and then
send a color fax (choosing Color in
Color Setting), the machine will send
the fax using the Fine setting.
Setting your changes as the
new default 3
You can store the fax options you use
frequently for Fax Resolution,
Contrast, Glass Scan Size,
Preview
1
, Real Time TX and
Color Setting by saving them as the
default settings. These settings will stay until
you change them again.
1
MFC-J870DW and MFC-J875DW only
a (MFC-J650DW)
Press (Fax).
(MFC-J870DW and MFC-J875DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and
(Sending Faxes).
b Press Options.
c Press a or b to choose the setting you
want to change, and then press your
new option.
Repeat this step for each setting you
want to change.
d After changing the last setting to your
preferred option, press a or b to display
Set New Default.
e Press Set New Default.
f The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
g Press .
Black & White
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of gray or is a
photograph. Photo has the
slowest transmission.
Color
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.