Advanced User's Guide

Chapter 3
14
Sending a fax at the end of a
conversation 3
At the end of a conversation, you can send a
fax to the other party before you both hang
up.
a Ask the other party to wait for fax tones
(beeps) and then to press the Start or
Send key before hanging up.
b Load your document.
c Press Fax Start.
If you are using the scanner glass,
press Send to send the fax.
d Replace the handset of the external
phone.
Dual Access
(Black & White only) 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The Touchscreen shows
the new job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
NOTE
If the Out of Memory message
appears, press to cancel or Send Now
to send the pages scanned so far.
Broadcasting
(Black & White only) 3
Broadcasting is automatically sending the
same fax message to more than one fax
number. You can include Groups, Address
Book numbers, and up to 50 manually dialed
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
Before you begin the broadcast 3
Address Book numbers must be stored in the
machine's memory before they can be used
in a broadcast. (See Basic User’s Guide:
Storing Address Book numbers.)
Group numbers must also be stored in the
machine's memory before they can be used
in a broadcast. Group numbers include many
stored Address Book numbers for easier
dialing. (See Setting up Groups for
Broadcasting on page 38.)
How to broadcast a fax 3
a Load your document.
b (MFC-J650DW)
Press (Fax).
(MFC-J870DW and MFC-J875DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and
(Sending Faxes).
c Press Options.
d Press a or b to display Broadcasting.
e Press Broadcasting.