Advanced User's Guide

Sending a fax
19
3
Checking and canceling
waiting jobs 3
You can check which jobs are still waiting in
the memory to be sent and cancel a job.
(If there are no jobs, the Touchscreen shows
No Jobs Waiting.)
a Press (Settings).
b Press All Settings.
c Press a or b to display Fax.
d Press Fax.
e Press a or b to display
Remaining Jobs.
f Press Remaining Jobs.
Any waiting jobs appear on the
Touchscreen.
g Press a or b to scroll through the jobs
and press the job you want to cancel.
Press OK.
h Do one of the following:
 To cancel, press Yes.
If you want to cancel another job, go
to step g.
 To exit without canceling, press No.
i When you are finished, press .
Polling overview 3
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polled Transmit
(Black & White only) 3
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory. (See Checking
and canceling waiting jobs on page 19.)
Setup for polled transmit 3
a Load your document.
b (MFC-J650DW)
Press (Fax).
(MFC-J870DW and MFC-J875DW)
Do one of the following:
 When Fax Preview is set to Off,
press (Fax).
 When Fax Preview is set to On, press
(Fax) and
(Sending Faxes).
c Press Options.
d Press a or b to display Polled TX.
e Press Polled TX.
f Press On (or Off).