Advanced User's Guide

Chapter 8
68
Restoring all settings to the
factory settings 8
You can restore the PhotoCapture settings
that you have changed—such as
Print Quality, Paper Type,
Paper Size, Print Size,
Auto Correct
1
, Brightness,
Contrast, Color Enhance, Cropping,
Borderless and Print Date—to the
factory settings.
1
MFC-J870DW and MFC-J875DW only
a Open the media slot cover.
b Put the memory card or USB Flash drive
in the correct slot.
c Press Photo.
d Press d or c to display View Photos.
e Press View Photos.
f Press d or c to display each photo.
When the photo you want is displayed,
press it, and then press OK.
g Press OK.
h Press Print Settings.
i Press a or b to display
Factory Reset.
j Press Factory Reset.
k The Touchscreen asks you to confirm to
change back to the factory settings.
Press Yes to confirm.
l Press .
Scan to a memory card
or USB Flash drive
8
Auto Crop (MFC-J870DW and
MFC-J875DW) 8
You can scan multiple documents placed on
the scanner glass. An individual document
can be previewed on the Touchscreen before
you save it. When you choose Auto Crop,
the machine will scan each document and
create separate files. For example, if you
place four documents on the scanner glass,
the machine will scan and create four
separate files. If you want to create a four-
page file, choose PDF or TIFF for
File Type.
(If you choose JPEG, the four documents are
created as four separate files.)
1 0.4 in. (10 mm) or greater (top, left, right)
2 0.8 in. (20 mm) or greater (bottom)
NOTE
Auto Crop is supported by technology
from Reallusion, Inc.
A4
1
2
3
4
1
24 3
A4
1
21