Advanced User's Guide
Table Of Contents
- Advanced User’s Guide MFC-J650DW MFC-J870DW MFC-J875DW
- User's Guides and where do I find them?
- Table of Contents
- 1 General setup
- 2 Security features
- 3 Sending a fax
- Additional sending options
- Additional sending operations
- Polling overview
- 4 Receiving a fax
- 5 Dialing and storing numbers
- 6 Printing reports
- 7 Making copies
- Copy options
- Stop copying
- Improving copy quality
- Enlarging or reducing copies
- Making N in 1 copies or a poster (Page Layout)
- 2 in 1 ID Copy (Page Layout)
- Sorting copies
- Adjusting Density
- Ink Save Mode (MFC-J870DW and MFC-J875DW)
- Thin Paper Copy (MFC-J870DW and MFC-J875DW)
- Book Copy (MFC-J870DW and MFC-J875DW)
- Watermark Copy (MFC-J870DW and MFC-J875DW)
- Remove Background Color
- 2-sided copying
- Setting your changes as the new default
- Restoring all settings to the factory settings
- Saving copy options as a Shortcut
- Copy options
- 8 PhotoCapture Center™: Printing photos from a memory card or USB Flash drive
- 9 Printing photos from a camera
- A Routine maintenance
- B Glossary
- Index
- brother USA/CAN
Routine maintenance
77
A
d Wipe the inside and outside of the paper
tray with a dry, soft lint-free cloth to
remove dust.
e Close the output paper tray cover and
put the paper tray firmly back in the
machine.
Cleaning the machine’s
printer platen A
WARNING
Be sure to unplug the machine from the AC
power outlet before cleaning the printer
platen to avoid an electrical shock.
a Place both hands under the plastic tabs
on both sides of the machine to lift the
scanner cover into the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
IMPORTANT
DO NOT touch the encoder strip (2).
Doing this may cause damage to the
machine.
c Lift the scanner cover to release the
lock. Gently push the scanner cover
support down and close the scanner
cover using both hands.
d Re-connect the power cord.
2
1