Manual
Table Of Contents
Configuration methods 
7
2
Configuration using the PIN Method of Wi-Fi Direct™ 2
If your mobile device supports the PIN Method of Wi-Fi Direct™, follow these steps to configure a 
Wi-Fi Direct™ network.
NOTE
When the machine receives the Wi-Fi Direct™ request from your mobile device, the message 
Wi-Fi Direct connection request received.
 will be displayed. Press 
OK
 to connect. If this happens 
before you reach step 
i
 in the instructions that follow, go directly to step 
i
 and continue configuration.
a Press .
b Press All Settings.
c Press s or t to display Network.
Press Network.
d Press Wi-Fi Direct.
e Press PIN Code.
f When Wi-Fi Direct On? is displayed, press On to accept.
To cancel, press Off.
g When Activate Wi-Fi Direct on other device. Then Press [OK]. is displayed, activate 
Wi-Fi Direct™ on your mobile device (see your mobile device's user's guide for instructions), and then 
press OK on your Brother machine. This will start the Wi-Fi Direct™ setup. 
To cancel, press  .
h Do one of the following:
 When your Brother machine is the G/O, it will wait for a connection request from your mobile device. 
When PIN Code appears, type the PIN displayed on your mobile device into the machine. Press OK. 
Follow the instructions and go to step j.
If the PIN is displayed on your Brother machine, type the PIN into your mobile device.
 When your Brother machine is not the G/O, it will display available device names with which to 
configure a Wi-Fi Direct™ network. Choose the mobile device to which you want to connect and press 
OK. Search for available devices again by pressing Rescan. Go to step i.
i Do one of the following:
 Press Display PIN Code to display the PIN on your machine and type the PIN into your mobile 
device. Follow the instructions and then go to step j.
 Press Input PIN Code to type a PIN shown by your mobile device into the machine and then press 
OK. Follow the instructions and then go to step j.
If your mobile device does not display a PIN, press   on your Brother machine. Go back to step a 
and try again.










