Manual

10
3
3
Overview 3
This section explains how to resolve typical network problems you may encounter when using the Brother
machine. If, after reading this chapter, you are unable to resolve your problem, visit the Brother Solutions
Center at http://solutions.brother.com/
and click Manuals on your model page to download other manuals.
Identifying the problem 3
Troubleshooting 3
Make sure you have checked the following:
The power cord is connected correctly and the Brother machine is turned on.
All protective packaging has been removed from the machine.
The ink cartridges are installed correctly.
The Scanner Cover and the Jam Clear Cover are fully closed.
Paper is inserted correctly in the paper tray.
Problem See page
I see error messages when configuring the Wi-Fi Direct™ from the control panel menu. 10
I cannot complete the Wi-Fi Direct™ network setup configuration. 12
I want to make sure that my network devices are working correctly. 12
I see error messages when configuring Wi-Fi Direct™ from the control panel menu.
Error Message Cause Action
Connection Failed The Brother machine and your mobile
device cannot communicate during
configuration.
 Move the mobile device closer to your
Brother machine.
 Move your Brother machine and the
mobile device to an obstruction-free
area.
 If you are using the PIN Method of WPS,
make sure you have entered the correct
PIN.
Connection Error Other devices are trying to connect to the
Wi-Fi Direct™ network at the same time.
Make sure there are no other devices trying
to connect to the Wi-Fi Direct™ network
and then try to configure the Wi-Fi Direct™
settings again.