Manual

Troubleshooting
11
3
No Device The Brother machine cannot find your
mobile device.
 Make sure your machine and mobile
device are in the Wi-Fi Direct™ mode.
 Move the mobile device closer to your
Brother machine.
 Move your Brother machine and the
mobile device to an obstruction-free
area.
 If you are manually configuring the
Wi-Fi Direct™ network, make sure you
have entered the correct password.
 If your mobile device has a configuration
page for how to obtain an IP address,
make sure the IP address of your mobile
device has been configured via DHCP.
A device is
already
connected. Press
[OK].
Another mobile device is already connected
to the Wi-Fi Direct™ network where the
Brother machine is the G/O.
After the current connection between your
Brother machine and another mobile device
has shut down, try to configure the
Wi-Fi Direct™ settings again. Confirm the
connection status by printing the Network
Configuration Report (see Software and
Network User’s Guide).
I see error messages when configuring Wi-Fi Direct™ from the control panel menu. (continued)
Error Message Cause Action