Quick Start Manual

2
a Remove the protective tape and film covering
the machine, and also from the Touchscreen.
b Remove the plastic bag a containing the ink
cartridges from on top of the paper tray.
c Make sure you have all the components.
2
Connect the power cord
and telephone line
a Connect the power cord.
b Lift the scanner cover until it locks securely into
the open position.
c Connect the telephone line cord.
Connect one end of the telephone line cord to
the jack marked LINE on the machine.
Carefully guide the telephone line cord into the
cable channel and out the back of the machine.
Connect the other end to a modular wall jack.
IMPORTANT
DO NOT connect the USB cable yet (if you are
using a USB cable).
NOTE
• If you do not plan to use the fax feature on this
machine, go to step 3 on page 4.
• To prolong the life of the print head, provide the
best ink cartridge economy and maintain print
quality, we do not recommend unplugging the
machine frequently and/or leaving the machine
unplugged for extended periods of time. Each
time you plug the machine in, it automatically
cleans the print heads, which uses some of
your ink.
We recommend using to power down the
machine. Using allows minimal power to
the machine, resulting in periodic, but less
frequent, cleaning of the print heads.
1
IMPORTANT
The telephone line cord MUST be connected to
the jack marked LINE on the machine.