User Manual

Table Of Contents
Home > Scan > Scan Using the Scan Button on Your Brother Machine > Scan to an Editable Text File Using
OCR
Scan to an Editable Text File Using OCR
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
Your machine can convert characters in a scanned document to text data using optical character recognition
(OCR) technology. You can edit this text using your preferred text-editing application.
(Macintosh) Presto! PageManager must be installed on your computer.
Download Presto! PageManager from
http://nj.newsoft.com.tw/download/brother/
PM9SEInstaller_BR_multilang2.dmg.
The Scan to OCR feature is available for certain languages.
Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent
changes, use Brother's ControlCenter software.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Load your document.
2. Press
(SCAN).
3. Press a or b to select the [Scan to OCR] option, and then press OK.
4. If the machine is connected over the network, press a or b to select the computer where you want to send
data, and then press OK.
If the LCD prompts you to enter a PIN, use the control panel to enter the four-digit PIN for the computer,
and then press OK.
5. Do one of the following:
To change the settings, go to the next step.
To use the default settings, press Mono Start or Colour Start.
[Scan Type] depends on the default settings. Pressing Mono Start or Colour Start does not allow you to
change the settings.
6. Press a or b to select the [Scan Settings] option, and then press OK.
To use the [Scan Settings] option, a computer with the ControlCenter software installed must be
connected to the machine.
115