User Manual

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Setup Receive
Auto Reduction
- Reduce the size of incoming faxes.
Memory Receive
- Set the machine to send faxes to your computer.
If you select PC-Fax Receive, you can turn on the Backup
Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of the received
faxes.
Setup AddressBook Set Speed Dial
- Store Speed Dial numbers, so you can dial by pressing only
a few buttons.
Setup Groups
- Set up Group numbers for broadcasting.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification
Report.
Journal Period
- Set the interval for automatic printing of the Fax Journal.
If you select other than Off and Every 50 Faxes, you can set
the time for the option.
If you select Every 7 Days, you can set the day of the week.
Print Document
- - Print received faxes stored in the memory.
Remaining Jobs
- - Check which scheduled jobs are in the memory and cancel
selected jobs.
Miscellaneous TX Lock
- Prohibit most functions except receiving faxes.
BT Call Sign
(U.K. only)
- Use with BT Call Sign.
Caller ID
(U.K. and Ireland
only)
- View or print a list of the last 30 Caller IDs stored in the
memory.
Settings > [Network]
Level 1
Level 2 Level 3 Descriptions
WLAN TCP/IP BOOT Method
Select the BOOT method that best suits your needs.
IP Address
Enter the IP address.
Subnet Mask
Enter the Subnet mask.
Gateway
Enter the Gateway address.
Node Name
Enter the Node name.
WINS Config
Select the WINS configuration mode.
WINS Server
Specify the IP address of the primary or secondary
WINS server.
DNS Server
Specify the IP address of the primary or secondary
DNS server.
APIPA
Set the machine to allocate the IP address from the
link-local address range automatically.
IPv6
Turn the IPv6 protocol on or off for a wireless LAN. To
use the IPv6 protocol, go to the Brother Solutions
Center at http://support.brother.com for more
information.
WLAN Assistant
- Configure your wireless network settings using the
Brother CD-ROM.
Setup Wizard
- Configure your internal print server manually.
560