User Manual
Table Of Contents
- Basic User's Guide DCP-L2520D/DCP-L2540DW/DCP-L2541DW/MFC-L2700D/MFC-L2701D/MFC-L2700DW/MFC-L2701DW/MFC-L2703DW
- For the Latest Driver Updates
- The Online User's Guide Helps You Get the Most Out of Your Machine
- If you have questions or problems, please take a look at our FAQs.
- Definitions of Notes
- Compilation and Publication Notice
- Table of Contents
- 1 General Information
- 2 Paper Handling
- 3 Print
- 4 Copy
- 5 Scan
- 6 Fax
- A Troubleshooting
- B Appendix
- C Index
Printing on Envelopes,
Thick Paper, or Labels
When the back cover (face-up output tray) is
pulled down, the machine has a straight paper
path from the manual feed slot on the front of
the machine through the back of the machine
and onto the face-up output tray. Use this
manual feed and output method for printing on
thick paper or envelopes.
• Load the paper or envelope into the
manual feed slot with the printing surface
face up.
• DO NOT load more than one sheet of
paper or one envelope in the manual
feed slot at any one time. Doing this may
cause a jam.
1
Open the back cover (face-up output
tray).
2
(For printing envelopes) Pull down the
two green levers, one on the left side
and one on the right side, to the
envelope position as shown in the
illustration.
3
On the front of the machine, open the
manual feed slot cover.
4
Slide the manual feed slot paper guides
to the width of the paper.
16