User Manual

Level 1 Level 2 Level 3 Descriptions
Setup Receive Fax Rx Stamp
- Print the received time and date on the top of received
faxes.
2-sided
- Print received faxes on both sides of the paper.
Setup Send Fax Resolution
- Change the lightness or darkness of faxes you send.
Contrast
- Set the default resolution for outgoing faxes.
Glass ScanSize
- Adjust the scan area of the scanner glass to the size of
the document.
Real Time TX
- Send a fax without using the memory.
Coverpage Note
Set up your own comments for the fax cover page.
Overseas Mode
- If you are having difficulty sending faxes overseas, set
this to On.
Auto Redial
- Set the machine to redial the last fax number after five
minutes, if the fax did not go through because the line
was busy.
Destination
- Set the machine to display the destination information on
the LCD during fax dialling.
Anti-Junk Fax
(Available only for some
countries.)
Register
- Register specific fax numbers to the blocked list to avoid
receiving faxes from the numbers.
Delete
- Delete the number from the blocked list.
Print Report
- You can print a list of registered fax numbers in the
blocked list.
Report Setting XMIT Verify
- Select the initial setup for the Transmission Verification
Report.
Journal Period
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Memory Receive Forward/Store
- Set the machine to forward fax messages or to store
incoming faxes in the memory (so you can retrieve them
while you are away from your machine).
PC Fax Receive
- Set the machine to send faxes to your PC.
Remote Access
- Set your own code for Remote Retrieval.
Print Document
- Print received faxes stored in the machine's memory.
Dial Restrict. Dial Pad
- Set the machine to restrict dialling when using the dial
pad.
One Touch Dial
- Set the machine to restrict the dialling of One Touch
numbers.
Speed Dial
- Set the machine to restrict the dialling of Speed Dial
numbers.
Remaining Jobs
- - Check which scheduled jobs are in the machine's
memory and cancel selected jobs.
Miscellaneous Distinctive
(Available only for
some countries.)
- Turn on the telephone company's Distinctive Ring
subscriber service to register your new ring pattern on the
machine.
Faxability
(For New Zealand.)
- If you have FaxAbility from Telecom, you can use this
function to store the ringing pattern of your fax number.
And if you set in to ON, you should use the registered
number only.
583