Operation Manual

Error Message Cause Action
available when the LCD displays
Replace Toner.
Touchscreen Initialisation
Failed
The touchscreen was pressed before
the power on initialization was
completed.
Make sure nothing is touching or
resting on the touchscreen.
Debris may be stuck between the
lower part of the touchscreen and its
frame.
Insert a piece of stiff paper between
the lower part of the touchscreen and
its frame and slide it back and forth to
push out the debris.
Related Information
• Troubleshooting
• Replace Supplies
• Replace the Drum Unit
• Clean the Corona Wire
• Print a Fax Stored in the Machine's Memory
455