User Manual

2. Do one of the following:
• For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
• For DCP models
Press a or b to enter the number of copies you want.
3. Press Options or Copy/Scan Options.
4. Press a or b to select [2-sided], and then press OK.
5. You can press the option you want, according to the menus and options on LCD.
6. When finished, press OK.
7. Press a or b to display [2sided → 2sided] or [1sided → 2sided], and then press OK.
NOTE
For DCP-7090DW/DCP-L2535DW/DCP-L2550DW/DCP-7190DW
If you select [2sided → 2sided], you cannot use the ADF. Use the scanner glass.
8. Press Start.
If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
9. Repeat the following steps for each page of the layout:
• For MFC models
After the machine scans the page, place the next page on the scanner glass, and then press a to scan
the page.
• For DCP models
After the machine scans the page, place the next page on the scanner glass, and then press a to select
the [Yes] option.
10. Press b to select the [No] option.
DCP-7195DW/MFC-7895DW
1. Load your document.
2. Press ([Copy]).
3. Enter the number of copies.
4. Press [Options].
5. Press a or b to display the [2-sided Copy] option, and then press [2-sided Copy].
6. Press a or b to display the layout options, and then press the option you want.
NOTE
For DCP-7195DW
If you select [2-sided -> 2-sided], you cannot use the ADF. Use the scanner glass.
7. When finished, press [OK].
8. Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.
If you are using the scanner glass, go to the next step.
9. After the machine scans the page, place the next page on the scanner glass, and then press [Yes] to scan
the next page.
10. After scanning all the pages, press [No] to finish.
167