User Manual

Table Of Contents
Examples of poor print quality Recommendation
envelope, choose Env. Thick in the media type
setting.
Envelope creases
Make sure the two green levers inside the back cover
are pulled down to the envelope position when you
print envelopes. After you have finished printing, reset
the levers back to their original position. Pull up the
levers until they stop.
Make sure envelopes are printed with the back cover
(face up output tray) opened.
(For models with Manual Feed Slot)
Make sure envelopes are fed only from the manual
feed slot.
Related Information
Troubleshooting
Related Topics:
Test Print
Clean the Drum Unit Using Drum Dot Print
Reduce Toner Consumption
Replace the Toner Cartridge
Replace the Drum Unit
478