User Manual

[All Settings] > [Fax]
Level 1 Level 2 Level 3 Descriptions
Setup Receive Receive Mode
- Select the Receive Mode that best suits your needs.
Ring Delay
- Set the number of rings before the machine answers in
Fax or Fax/Tel mode.
F/T Ring Time
- Set the length of the pseudo/double-ring time in Fax/Tel
mode.
Fax Preview
- View received faxes on the LCD.
Fax Detect
- Receive fax messages automatically when you answer a
call and hear fax tones.
Remote Codes
- Answer calls at an extension or external telephone and
use codes to turn the Remote Codes on or off. You can
personalise the codes.
Auto Reduction
- Reduce the size of incoming faxes.
PC Fax Receive
- Set the machine to send faxes to your computer.
You can turn on the Backup Print safety feature.
Memory Receive
- Set the machine to forward fax messages or to store
incoming faxes in the memory (so you can retrieve them
while you are away from your machine).
If you select Fax Forward, you can turn on the Backup
Print safety feature.
Fax Rx Stamp
- Print the received time and date on the top of received
faxes.
2-sided
- Print received faxes on both sides of the paper.
Setup Send Coverpage Note
- Set up your own comments for the fax cover page.
Auto Redial
- Set the machine to redial the last fax number after five
minutes, if the fax did not go through because the line was
busy.
Destination
- Set the machine to display the destination information on
the LCD during fax dialling.
Anti-Junk Fax
(Available only for
some countries.)
Register
- Register specific fax numbers to the blocked list to avoid
receiving faxes from the numbers.
Delete
- Delete the number from the blocked list.
Print Reports
- You can print a list of registered fax numbers in the
blocked list.
Report Setting XMIT Report
- Select the initial setup for the Transmission Verification
Report.
Journal Period Journal
Period
Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Time
If you select an option other than Off and Every 50 Faxes,
you can set the time for the option.
If you select Every 7 Days, you can set the day of the
week.
Day
If you select Every 7 Days, you can set the day of the
week.
Print Document
- - Print received faxes stored in the machine's memory.
Remote Access
- - Set your own code for Remote Retrieval.
588