User Manual
Table Of Contents
- Web Connect Guide HL-L2380DW/DCP-L2560DW/MFC-L2720DW/MFC-L2740DW
- Before You Use Your Brother Machine
- Table of Contents
- Before You Use Brother Web Connect
- Scan and Upload
- Download and Print
- About Outline, Scan, and Copy or Cut
- NotePrint and NoteScan
- Web Connect Shortcut Settings
- Troubleshooting for Brother Web Connect
Home > Before You Use Brother Web Connect > Conditions for Using Brother Web Connect > Configure
the Proxy Server Settings Using Web Based Management
Configure the Proxy Server Settings Using Web Based Management
If your network uses a proxy server, the following proxy server information must be configured on the machine:
• Proxy server address
• Port number
• User Name
• Password
We recommend Microsoft
®
Internet Explorer
®
8.0/9.0/10.0 for Windows
®
and Safari 5.0/6.0 for Macintosh.
Make sure that JavaScript and Cookies are always enabled in whichever browser you use. If a different
web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
1. Start your web browser.
2. Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example: http://192.168.1.2
3. No password is required by default. Type a password if you have set one, and then click .
4. Click the Network tab.
5. Click Protocol in the left navigation bar.
6. Make sure the Proxy check box is selected, and then click Submit.
7. In the Proxy field, click Advanced Setting.
8. Enter the proxy server information.
9. Click Submit.
Related Information
• Conditions for Using Brother Web Connect
10