User Manual

Home > About Outline, Scan, and Copy or Cut > Outline, Scan, and Copy or Cut Parts of Your
Documents > Cut an Outlined Section
Cut an Outlined Section
Outline areas of your document with a red line and use Outline and Cut to remove those areas from your final
scanned document.
1. Using a thick red pen or marker, outline the areas of the document that you want to cut.
2. Load your document.
3. Press d or c to display the Apps option.
4. Press Apps.
• Occasionally, updates or announcements about Brother Web Connect's features will be displayed on
the LCD. Read the information, and then press OK.
• If information regarding the Internet connection is displayed on the machine’s LCD, read the information
and press OK. If you want to display this information again, press Yes.
5. Press a or b to display Outline&Copy.
6. Press Outline&Copy.
7. Press Cut outlined area.
8. If information regarding Cut outlined area is displayed, read the information and press OK. If you want to
display this information again, press Yes.
9. The Copy Settings screen will be displayed. Change your setting, if needed.
10. Press OK.
The machine starts scanning. If you are using the machine's scanner glass, follow the LCD instructions to
complete the printing job.
11. When the machine finished printing, press OK.
12. Press
.
Related Information
• Outline, Scan, and Copy or Cut Parts of Your Documents
39