User Manual

Table Of Contents
Level 1 Level 2 Level 3 Descriptions
Setup Send Fax Resolution
- Change the lightness or darkness of faxes you send.
Contrast
- Set the default resolution for outgoing faxes.
Glass ScanSize
- Adjust the scan area of the scanner glass to the size of the
document.
Real Time TX
- Send a fax without using the memory.
Coverpage Message
Set up your own comments for the fax cover page.
Overseas Mode
- If you are having difficulty sending faxes overseas, set this to On.
Auto Redial
- Set the machine to redial the last fax number after five minutes, if
the fax did not go through because the line was busy.
Destination
- Set the machine to display the destination information on the
LCD during fax dialling.
Anti-Junk Fax Register
- Register specific fax numbers to the blocked list to avoid
receiving faxes from the numbers.
Delete
- Delete the number from the blocked list.
Print Report
- You can print a list of registered fax numbers in the blocked list.
Report Setting Transmission
- Select the initial setup for the Transmission Verification Report.
Journal Period
- Set the interval for automatic printing of the Fax Journal.
If you select an option other than Off and Every 50 Faxes, you
can set the time for the option.
If you select Every 7 Days, you can set the day of the week.
Memory Receive Fwd/Page/Store
- Set the machine to forward fax messages or to store incoming
faxes in the memory (so you can retrieve them while you are
away from your machine).
PC Fax Receive
- Set the machine to send faxes to your PC.
Remote Access
- Set your own code for Remote Retrieval.
Print Fax
- Print received faxes stored in the machine's memory.
Dial Restrict. Dial Pad
- Set the machine to restrict dialling when using the dial pad.
One Touch Dial
- Set the machine to restrict the dialling of One Touch numbers.
Speed Dial
- Set the machine to restrict the dialling of Speed Dial numbers.
Remaining Jobs
- - Check which scheduled jobs are in the machine's memory and
cancel selected jobs.
[Copy]
Level 1
Level 2 Descriptions
Density
- Adjust the density.
Quality
- Choose the Copy resolution for your type of document.
Contrast
- Adjust the contrast for copies.
ID Copy Density
Adjust the density.
Quality
Choose the Copy resolution for your type of document.
Contrast
Adjust the contrast for copies.
2in1/1in1
Make 2 in 1 ID copies.
[Printer]
For Printer Emulation Supported models
577